1LY-5 Disc Plough Agriculture machinery Customizable fast delivery speed-manufacture,factory,supplier from China

What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.

(1)High hardness discs with 65Mn Spring steel material make perfect soil deep cultivating. (2)The plough discs are rotated during work, no entangle the grass and no block(3)Surface sprayed treatment, beautiful appearance, not easy to fade(4)Widely applications for cultivated or hard land, universally used for 60hp to 160hp tractors(5)Strong construction, big bolts and nuts, high quality spare parts, resonable design make this plough excellent work and long service life. 

This baldan disc plough is very popular by customers and widely application.It is standard 3 point linkage with four wheel tractors from 60hp to 160hp. The discs are rotary motion when tuning the soil.

It is a installed adverse mild disc harrow for 30-60hp.High performanceRobust capability of soil pulverizationThe tractor with out deflective trailed pressureThe operating depth of this established mild disk harrow can be adjusted freely though adjust the perspective between the disc body.

A chisel plough is capable of penetrate, split, and level soil even over rocky, hard, or wetland, unlike the normal plough.The chisel plough plays the initial loosening of the soil while leaving the trash on top.Not like the disc plough that reverts natural count number from constructing at the soil, chisel maintains the organic depend from the soil and lessens soil erosion.

During the operation of the automatic feeding corn thresher, the speed of the car must not be too fast or too slow, otherwise it is easy to block the feed inlet, feed evenly, such as uneven can lead to broken CORNCOB, low yield, plug.Troubleshooting: 1. the front hopper down rollers too close to the ground, resulting in large angle iron scraping. 2. If the band is too loose, adjust the roller upwards to reinstall the band. 3. the clutch is too loose, the Clutch U Card to the outside loose a few silk solution. 4.

This 3QL series agriculture equipment furrow ridger gadget tractor ridger is suitable for ridging after the tillage in the farm area. It includes heavy duty tubular field body, the complete device is made a lot stronger than everyday ones. This ridger is suitable for ridging after the tillage inside the field for potato, beans, vegetable etc.It is convenient to regulate the ridging top and the ridging rows and space between every ridge. It could be effortlessly spaced (widened or narrowed) consistent with the crop requirement. The rubber tires may be moved without problems.

1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It is forbidden to combine the blade with the power output shaft or down the Rototiller after the blade is buried, so as not to cause the blade to bend or break and increase the load of the tractor. 2.

1. The liquid medicine box has large capacity, long spraying time and high working efficiency. 2. The liquid pump of the spraying machine adopts multi-cylinder diaphragm pump, which has large displacement and reliable operation. 3. The spray bar adopts single-point hanging balance mechanism, which has good balance effect. 4. The spray bar adopts the pull-rod turntable folding mechanism. The lifting, unfolding and folding of the spray bar can be controlled by operating the hydraulic cylinder in the cab, which is convenient and labor-saving. 5.

 5TY Series Corn Thresher, when working, the corn is fed by the feed mouth, the corn is hit in the high speed rotating rotor and the drum, the kernel is separated by the sieve hole, the corn core is discharged from the tail of the machine, the corn silk, the skin is discharged from the tuyere. The feed hole is arranged on the upper cover of the machine. The corn stick enters the threshing chamber through the feed hole. The corn grains are knocked off by the high-speed rotating rotor in the threshing chamber and separated through the sieve holes.